General Description
The MAX1363/MAX1364 low-power, 12-bit, 4-channel
analog-to-digital converters (ADCs) feature a digitally
programmable window comparator with an interrupt out-
put for automatic system-monitoring applications. Once
configured, monitor mode automatically asserts an inter-
rupt when any analog input exceeds the programmed
upper or lower thresholds, without interaction to the
host. The MAX1363/MAX1364 respond to the SMBus
alert, allowing quick identification of the alarming device
on a shared interrupt. A programmable delay between
monitoring intervals lowers power consumption for
reduced monitoring rates.
In addition, the MAX1363/MAX1364 integrate an inter-
nal voltage reference, a clock, and a 1.7MHz, high-
speed, I2C-compatible, 2-wire serial interface. The opti-
mized interface allows a maximum conversion rate of
94.4ksps in normal mode while reading back the con-
version results. Each of the four analog inputs is config-
urable for single-ended or fully differential operation
and unipolar or bipolar operation. Two scan modes uti-
lize on-chip random access memory (RAM) to allow
eight conversions of a selected channel or scanning of
a group of channels to reduce interface overhead.
These devices operate from a single 2.7V to 3.6V
(MAX1363) or 4.5V to 5.5V (MAX1364) supply and
require only 436A at the maximum sampling rate of
133ksps in monitor mode and 670A at the maximum
sampling rate of 94.4ksps. AutoShutdown powers
down the devices between conversions, reducing sup-
ply current to less than 1A when idle.
The full-scale analog-input range is determined by the
internal reference or by an externally applied reference
voltage ranging from 1V to VDD. The MAX1363 features
a 2.048V internal reference, and the MAX1364 features
a 4.096V internal reference.
The MAX1363/MAX1364 are available in a 10-pin
MAX package and are specified over the extended
(-40°C to +85°C) temperature range. For 10-bit applica-
tions, refer to the pin-compatible MAX1361/MAX1362
data sheet.
Applications
System Monitoring/Supervision
Servers/Workstations
High-Reliability Power Supplies
Medical Instrumentation
Features
Monitor Mode
Programmable Lower/Upper Trip Threshold
Alarm-Status Register Records Fault Events
SMBus Alert Response
Programmable Sampling Intervals
12-Bit, I2C-Compatible ADC
±1 LSB INL, ±1 LSB DNL
4-Channel Single-Ended or 2-Channel Fully
Differential Inputs
Software-Programmable Bipolar/Unipolar
Conversions
Fast Sampling Rate
94.4ksps While Continuously Reading
Conversions
133ksps in Monitor Mode
High-Speed, I2C-Compatible Serial Interface
100kHz/400kHz Standard/Fast Mode
Up to 1.7MHz High-Speed Mode
Six Available I2C Slave Addresses
Single Supply
2.7V to 3.6V (MAX1363)
4.5V to 5.5V (MAX1364)
Internal Reference
2.048V (MAX1363)
4.096V (MAX1364)
External Reference: 1V to VDD
Low Power
436A in Monitor Mode (133ksps)
670A at 94.4ksps
6A at 1ksps
0.5A in Power-Down Mode
Small Package
10-Pin MAX
MAX1363/MAX1364
4-Channel, 12-Bit System Monitors with Programmable
Trip Window and SMBus Alert Response
________________________________________________________________
Maxim Integrated Products
1
Ordering Information/Selector Guide
19-3338; Rev 3; 3/08
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
EVALUATION
KIT
AVAILABLE
PART
TEMP RANGE
PIN-PACKAGE
I
2C SLAVE ADDRESS
SUPPLY VOLTAGE (V)
MAX1363EUB+
-40°C to +85°C
10 MAX
0110100/0110101
2.7 to 3.6
MAX1363MEUB+
-40°C to +85°C
10 MAX
0110110/0110111
2.7 to 3.6
SMBus is a trademark of Intel Corporation.
AutoShutdown is a trademark of Maxim Integrated Products, Inc.
MAX is a registered trademark of Maxim Integrated Products, Inc.
Typical Operating Circuit and Pin Configuration appear at
end of data sheet.
Ordering Information/Selector Guide continued at end of data sheet.
+Denotes a lead-free package.
相关PDF资料
MAX1394ETB+T IC ADC 8BIT 416KSPS 10-TDFN-EP
MAX1395ETB+T IC ADC 10BIT 357KSPS 10-TDFN
MAX1400CAI+ IC ADC 18BIT LP 28-SSOP
MAX1401CAI+ IC ADC 18BIT LP 28-SSOP
MAX1415AEWE+T IC ADC 16BIT DELTA SIGMA 16-SOIC
MAX1421CCM+D IC ADC 12BIT 40MSPS 48LQFP
MAX1426EAI+T IC ADC 10BITS 10MSPS 28SSOP
MAX1434ECQ+D IC ADC 10BIT 50MSPS 100-TQFP
相关代理商/技术参数
MAX1364MEUB-T 功能描述:模数转换器 - ADC 12-Bit 4Ch 133ksps 5.5V Precision ADC RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
MAX1365ECM 功能描述:LED显示驱动器 RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
MAX1365ECM+ 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
MAX1365ECM+T 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
MAX1365ECM-T 功能描述:LED显示驱动器 RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
MAX1366ECM 功能描述:LED显示驱动器 RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
MAX1366ECM+ 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube
MAX1366ECM+T 功能描述:LED显示驱动器 Stand-Alone 4.5Digit Panel Meters RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube